Hyundai Ioniq: Trickle Charge / How to set the charge level of the portable charger
1. Check the rated current of the electric outlet prior to connecting the plug
to the outlet.
2. Connect the plug to a household electric outlet.
3. Check the display window on the control box.
4. Press the button (1) on the back of the control box for more than 1 second
to adjust the charge level. (Refer to charging cable type and example for setting
the charge level.)
5. The display window on the control box changes from H and M to L every time
you press the button (1).
6. When setting the charge level is complete, start charging according to the
trickle charge procedure.
■ Portable Charger
(1) Code and Plug (Code set)
(2) Control Box
(3) Charging Cable and Charging Connector
Trickle Charge can be used when Normal Charge is not available by using household
electricity...
1. Connect the plug to a household electric outlet.
2. Check if the power lamp (green) illuminates on the control box.
3. Depress the brake pedal and apply the parking brake...
Other information:
The sensors are located inside the rear bumper.
Always keep the rear bumper clean for the proper operation of the system.
Warning message
Blind-Spot Collision Warning (BCW) system disabled. Radar blocked
This warning message may appear when : - One or both of the sensors on the rear
bumper is blocked by dirt or snow or a foreign object...
Removal1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the front wheel and tire (A) from the rear hub. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
•
Be careful not to damage the hub bolts when removing the rear wheel and tire (A)...
Categories
Adjusting the side mirrors:
1. Press either the L (driver's side) or R (passenger's side) button (1) to select
the side view mirror you would like to adjust.
read more