Hyundai Ioniq: Power Windows / Power window lock switch

The driver can disable the power window switches on the rear passenger's doors
by pressing the power window lock switch.
When the power window lock switch is pressed:
- The driver's master control can operate all the power windows.
- The front passenger's control can operate the front passenger's power window.
- The rear passenger's control cannot operate the rear passenger's power window.
WARNING
Do not allow children to play with the power windows. Keep the driver's door
power window lock switch in the LOCK position. Serious injury or death can result
from unintentional window operation by a child.
NOTICE
- To prevent possible damage to the power window system, do not open or
close two windows or more at the same time. This will also ensure the longevity
of the fuse.
- Never try to operate the main switch on the driver's door and the individual
door window switch in opposite directions at the same time. If this is done,
the window will stop and cannot be opened or closed.
To open:
Press the window switch down to the first detent position (5). Release the switch
when you want the window to stop.
To close:
Pull the window switch up to the first detent position (5)...
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control switch located on the overhead console.
The sunroof can only be opened, closed, or tilted when the Engine Start/Stop
button is in the ON position...
Other information:
DescriptionContinuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load.By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel economy and reduces exhaust gases (NOx, HC) and improves engine performance through reduction of pumping loss, internal EGR effect, improvement of combustion stability, improvement of volumetric efficiency, and increase of expansion work...
Description and OperationWireless Power Charger SystemDuring ACC or IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile phone. Mobile phones certified with the wireless charging standard WPC (Qi 1...
Categories

The Driver Position Memory System is provided to store and recall the following
memory settings with a simple button operation.
- Driver's seat position
- Side view mirror position
- Instrument panel illumination intensity
read more