Hyundai Ioniq: Seat Electrical / Seat Heater Switch. Schematic diagrams
[Front Seat Heater Switch (Driver)]
[Front Seat Heater Switch (Passenger)]
[Rear Seat]
Removal[Front Seat]1.Disconnect the negative (-) battery terminal.2.Remove the floor console upper cover.(Refer to Body - "Floor Console Assembly")3.Remove the seat heater switch after loosening mounting screws...
Other information:
CAUTION
Detach the speed restriction label (1) from the sealant bottle (2), and place
it in a highly visible place inside the vehicle such as on the steering wheel to
remind the driver not to drive too fast.
2. Connect the filling hose (3) to the sealant bottle (2) in the direction of
(A) and connect the sealant bottle to the compressor (5) in the direction of (B)...
Removal1.Turn the ignition switch OFF and disconnect the auxiliary 12V battery negative (-) terminal.2.Remove the safety plug cover (A).3.Unfasten the hook (A) and then remove the safety plug (C) by pulling the lever (B) to the direction of arrow.Installation
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system...
Categories
Folding the rear seat
The rear seatbacks can be folded to facilitate carrying long items or to increase
the luggage capacity of the vehicle.
WARNING
Never allow passengers to sit on top of the folded down seatback while
the vehicle is moving. This is not a proper seating position and no seat belts
are available for use. This could result in serious injury or death in case
of an accident or sudden stop.
Objects carried on the folded down seatback should not extend higher
than the top of the front seatbacks. This could allow cargo to slide forward
and cause injury or damage during sudden stops.
read more