| Specifications |
|
Items
|
Specifications
| |
| Rated voltage | DC 12V | |
| Operating temperature range | -40 to +176°F (-40°C to +80°C) | |
| Rated load | Washer | Washer : 5A (Motor load) |
Component1. Steering column2. Multifunction switch3. Screw4. Clock spring
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel assembly.(Refer to Steering System -"Steering Wheel")3.Remove the steering back cover (A).4.Remove the steering remote control connector (A).5.Remove the steering remote control (A), after loosening the screws.