Lift and Support Points1.Place the lift blocks under the support points as shown in the illustration.2.Raise the hoist a few inches (centimeters) and rock the vehicle to be sure it is firmly supported.
TowingIf the vehicle needs to be towed, call a professional towing service. Never tow vehicle with just a rope or chain. It is very dangerous.Emergency TowingThere are three popular methods of towing a vehicle : – The operator loads the vehicle on the back of truck.
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.