Hyundai Ioniq: Convenient features of your vehicle / Windshield Defrosting and Defogging
WARNING
Windshield heating
Do not use the or
position during cooling operation
in extremely humid weather. The difference between the temperature of the outside
air and that of the windshield could cause the outer surface of the windshield to
fog up, causing loss of visibility could cause an accident resulting in serious
injury or death. In this case, set the mode selection knob or button to the
position and fan speed control knob
or button to a lower speed.
- For maximum defrosting, set the temperature control to the extreme right/hot
position and the fan speed control to the highest speed.
- If warm air to the floor is desired while defrosting or defogging, set the
mode to the floor-defrost position.
- Before driving, clear all snow and ice from the windshield, rear window,
side view mirrors, and all side windows.
- Clear all snow and ice from the hood and air inlet in the cowl grill to
improve heater and defroster efficiency and to reduce the probability of fogging
up the inside of the windshield.
Information
If the engine temperature is still cold after starting, then a brief engine
warm up period may be required for the vented air flow to become warm or hot.
The actual Air Conditioning refrigerant label in the vehicle may differ from
the illustration.
Each symbols and specification on air conditioning refrigerant label means as
below :
1...
1. Select the desired fan speed.
2. Select the desired temperature.
3. Press the defroster button ().
4. The outside (fresh) air position will be selected automatically...
Other information:
Basic TroubleshootingBasic Inspection ProcedureMeasuring Condition of Electronic Parts' ResistanceThe measured resistance at high temperature after vehicle running may be high or low. So all resistance must be measured at ambient temperature (20°C, 68°F), unless stated otherwise...
C..
Categories
Seat belt warning light
As a reminder to the driver, the seat belt warning light will illuminate and
warning chime will sound for approximately 6 seconds each time you place the Engine
Start/Stop button to the ON position if the seat belt is unfastened.
read more