Hyundai Ioniq (AE): Body Electrical System / Wireless Power Charger System
- Specification
- Components and positions
- Description and operating principle
- Troubleshooting
- Wireless Power Charging Unit. Components and positions
- Wireless Power Charging Unit. Circuit diagram
- Wireless Charging Lamp. Components and positions
- Wireless Charging Lamp. Repair procedures
Removal1.Disconnect the negative(-) battery terminal.2.Remove the front bumper cover.(Refer to Body - "Front Bumper Cover")3.Disconnect the VESS speaker connector (A) and then remove the VESS speaker (B) after loosening mounting bolts.
Specifications Item Specification Rated voltageDC 13.5 VOperating voltageDC 7.5 - 16.0 VOperating temperature-86 to 167°F (-30 to 75°C)Dark currentMax.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: A/C Pressure Transducer. Description and operation
DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- Engine Mechanical System
- How to Connect Portable Charger (ICCB: In-Cable Control Box)
- New on site
- Most important about car
