| Comoinents |

| 1. Air cleaner body 2. Air cleaner element 3. Air cleaner cover 4. Air flow sensor | 5. Air intake hose 6. Air duct hose 7. Air duct |
Removal and InstallationAir Cleaner Assembly1.Disconnect the battery negative terminal.2.Remove the air duct and air cleaner assembly. Tightening torque : Hose clamp : 2.
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.