Removal and Installation1. Remove the oil level gauge (A).2.Install in the reverse order of removal.
Comoinents1. Air cleaner body2. Air cleaner element3. Air cleaner cover4. Air flow sensor5. Air intake hose6. Air duct hose7. Air duct
Self Diagnosis1.Self-diagnosis process. • When operating the self-diagnostics, the below fault (self-diagnostics code) will blink at 0.5 seconds interval on the temperature display settings (driver's side only) and the remaining symbols are OFF .
Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.