Hyundai Ioniq (AE): High Voltage Battery Cooling System / Cooling Fan. Description and operation

Description
The cooling Fan consists of the main connector, the cooling fan relay and the BLDC motor. It is controlled by the BMS ECU PWM signal which varies with the high voltage battery condition (9-Speed).

    Component Location1. Cooling Fan2. Cooling Duct (Inlet)3. Cooing Duct (Outlet)

    Specification Duty (%) Fan Speed (rpm) 10500201,000301,300401,600501,900602,200702,500802,80090 (Max.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation

    DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures

    Removal1.Disconnect the negative (-) battery terminal.2.Remove the tailgate lid trim.(Refer to Body - "TailGate Lid Trim")3.Disconnect the Rear view camera connector (A).4.Remove the Rear view camera assembly after loosening the mounting screws.Installation1.

    Categories

     
    Copyright В© 2026 www.hioniqae.com - 0.0165