Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Component Location1. Cooling Fan2. Cooling Duct (Inlet)3. Cooing Duct (Outlet)
DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower m
Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.