Horn

To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed.
NOTICE
Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object.
Heated Steering Wheel

When the Engine Start/Stop button is in the ON position or when the vehicle is
in the ready (
) mode, press the heated
steering wheel button to warm the steering wheel. The indicator on the button will
illuminate.
To turn the heated steering wheel off, press the button again. The indicator on the button will turn off.
The heated steering wheel will automatically turn off after approximately 30 minutes.
NOTICE
Do not install any cover or accessory on the steering wheel. The cover or accessory could cause damage to the heated steering wheel system.
Adjust the steering wheel so it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges.
Inspection1.Turn the ignition switch OFF.2.Disconnect the evaporator temperature sensor connector.3.Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.Specification Evaporator core temperature [°C (°F)] Resistance [KΩ]
DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower m