Important Safety NoticeProper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator.
Identification NumbersIdentification Number DescriptionVehicle Identification Number1.World Manufacturer Identifier (WMI)- KMH : Passenger vehicle, MPV(Multipurpose Passenger Vehicle)/SUV(Sports Utility Vehicle)/RV(Recreational Vehicle)- KMF : Commercial vehicle (Van)- KM8 : MPV/SUV/RV (For U.
Inspection1.Turn the ignition switch ON.2.Connect the GDS.3.Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.4.The voltage will rise with higher intensive light and reduce with lower intensive light.1. Auto light signal2.
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper