Hyundai Ioniq (AE): High Voltage Battery Control System / Main Relay. Specifications
| Specification |
|
Item
|
Specification
| |
| Contact | Rated Voltage (V) | 450 |
| Rated Current (A) | 80 | |
| Coil | Operating Voltage (V) | 12 |
| Resistance (Ω) | 20.0 - 40.0 [20°C (68°F)] | |
DescriptionThe Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor.
Circuit Diagram
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Evaporator Temperature Sensor. Description and operation
DescriptionThe evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC).
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Hybrid Vehicle Engine Compartment
- How to Connect Portable Charger (ICCB: In-Cable Control Box)
- Hybrid Control System
- New on site
- Most important about car
