Hyundai Ioniq (AE): Clutch Actuator Assembly / Specifications
| Specification |
|
Item
|
Condition
|
Specifications
|
| Resistance (line to line) | Motor 1 | 57 mΩ ±10 % |
| Motor 2 | 57 mΩ ± 10 % | |
| Rated voltage | 12 V | |
| Max. current | 60 A | |
| Operation condition (°C)°F | -40 to 257 °F (- 40 to 125 °C ) | |
Components1. Clutch Actuator Assembly2. Fork Cover3. Clutch Actuator Motor (Odd)4. Clutch Actuator MOtor (Even)
Description• Components location : DCT (Dual Clutch Transmission)• Function The clutch actuator receives signals from the Transmission Control Module (TCM) and controls the clutch.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Description and operation
DescriptionThe auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor rpm and mod
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Jump Starting
- Engine Clutch System
- Engine Mechanical System
- New on site
- Most important about car
