Hyundai Ioniq (AE): Steering System / Specifications

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Steering System / Specifications

Specifications
Item
Specification
Type
Electric Power Steering System
Steering gear
Type
Rack & Pinion
Rack stroke
154 ± 1 mm (6.07 ± 0.04 in)
Steering angle (Max.)
Inner
39.4° + 0.5° / -1.5°
Outer
32.6°

Tightening Torques
Item
Tightening torque (kgf.m)
N.m
kgf.m
lb-ft
Hub nuts
107.9 - 127.5
11.0 - 13.0
79.6 - 94.0
Steering wheel lock nut
44.1 - 49.0
4.5 - 5.0
32.5 - 36.2
Steering column mounting
Bolt
53.9 - 58.8
5.5 - 6.0
39.8 - 43.4
Nuts
25.0 - 29.4
2.5 - 3.0
14.5 - 21.7
Steering column to Universal joint (M8 BOLT)
32.4 - 38.3
3.3 - 3.8
23.9 - 27.5
Steering column to Universal joint (M10 BOLT)
49.0 - 58.8
5.0 - 6.0
36.2 - 43.4
Bolt connecting universal joint to pinion
32.4 - 38.3
3.3 - 3.8
23.9 - 27.5
Tie rod end castle nut
78.5 - 98.1
8.0 - 10.0
57.9 - 72.3
Lower arm to front axle
78.5 - 98.1
8.0 - 10.0
57.9 - 72.3
Steering gear box to sub frame
88.3 - 107.9
9.0 - 11.0
65.1 - 79.6
Stabilizer link nut
98.1 - 117.7
10.0 - 12.0
72.3 - 86.8
Sub frame mounting bolts & nuts
156.9 - 176.5
16.0 - 18.0
115.7 - 130.2

    High Voltage Shut-off Procedures    â€¢ Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.

    Special Service Tools Tool (Number and Name) Illustration Use 09568-1S100Ball joint pullerSaperate the ball joint from the front alxe

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Photo Sensor. Repair procedures

    Inspection1.Turn the ignition switch ON.2.Connect the GDS.3.Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.4.The voltage will rise with higher intensive light and reduce with lower intensive light.1. Auto light signal2.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures

    Replacement1.Remove the battery (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.Remove the heater hose (A) and AEWP hose (B).4.Disconnect the lock pin to remove the heater hose pump connector (A).

    Categories

     
    Copyright © 2025 www.hioniqae.com - 0.0203