| Components |

| 1. Left Remote Control Switch (Audio + Hands free) | 2. Right Remote Control Switch (Cruise+Trip Computer) |
Removal1.Disconnect the negative (-) battery terminal.2.Open the trunk, remove the right luggage side trim.(Refer to Body - "Luggage Side Trim")3.Remove the external amplifier after disconneting the connector (A) and loosening the mounting nuts.
Circuit Diagram[Audio+B/Tooth][Audio+B/Tooth+Voice][Trip][Trip+Cruise][Trip+Cruise+SCC]
Component Location1. Heater unit assemblyCompoents1. Heater core cover2. Heater core & Seal assembly3. Mode actuator [LH]4. Temperature control actuator [LH]5. Shower duct [LH]6. Duct sensor [Floor]7. PTC Heater8. Duct sensor [Vent]9. Heater & Evaporator lower case10.
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.