| Components |

| 1. Front door trim 2. Front door pull cap 3. Front door belt inside weatherstrip 4. Front door quadrant inner cover 5. Front door module 6. Front door panel | 7. Front door side impact pad 8. Front door belt outside weatherstrip 9. Front door body side weatherstrip 10. Front door side weatherstrip 11. Front door hinge |
AdjustmentGlass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary.
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Self Diagnosis1.Self-diagnosis process. • When operating the self-diagnostics, the below fault (self-diagnostics code) will blink at 0.5 seconds interval on the temperature display settings (driver's side only) and the remaining symbols are OFF .