Hyundai Ioniq (AE): High Voltage Battery System / Components and components location
| Components |
| 1. High Voltage Battery Module 2. Power Relay Assembly (PRA) 3. BMS 4. Cooling Fan 5. Safeety Plug | 6. Battery Temperature Sensor 7. High Voltage Battery Plate 8. High Voltage Battery Front Cover 9. High Voltage Battery Rear Cover 10. Auxiliary 12V Battery |
DescriptionThe High Voltage Battery System provides the hybrid drive motor, HSG, and electric A/C compressor with electric energy and also reserves the electric energy generated during regeneration braking.
SpecificationBattery Pack Assemblyâ–· Type : LiPB (Lithium ion Polymer Battery), Pouch typeâ–· Specification[General Specification] Item Specification Remarks Number of Cells 16 Cells x 4 Modules 1 Cells = 3.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: PTC Heater. Description and operation
DescriptionThe PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core.The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective hybrid engine.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Cruise Control Switch. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel assembly.(Refer to Steering System - "Steering Wheel")3.Remove the steering back cover (A).4.Remove the steering remote control connector (A).5.Remove the steering remote control after loosening the screws.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- Troubleshooting
- Front Disc Brake. Repair procedures
- New on site
- Most important about car
