Hyundai Ioniq: Airbag Module / Curtain Airbag (CAB) Module. Description and operation
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.
•
| Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury. |
|
Removal 1.Disconnect the negative battery terminal.
•
After disconnecting the cables, wait at least 3 minutes...
Other information:
Inspection Transmission Control Module (TCM) Inspection Procedure 1.Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the terminal connected to the chassis ground while using the back of the harness connector as the base point for TCM...
When the vehicle is under regular maintenance, make sure to separate the (-)
cable before maintenance. Separate the (-) cable following the below instructions.
1. Fold the rear left side seat.
2. Remove the service cover (A) on the luggage trim.
3. Separate the (-) cable (B)...
Categories

1. Engine oil filler cap
2. Engine oil dipstick
3. Engine coolant cap
4. Engine coolant reservoir
5. Inverter coolant reservoir
read more