| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
The dual clutch is installed within the transmission. The dual clutch is comprised of an odd clutch and an even clutch. The odd clutch transfers and cuts off engine and motor power to the transmission when shifting odd gears. The even clutch transfers and cuts off engine and motor power to the transmission when shifting even gears. |
Components1. Retaining ring2. Spline hub3. Snap ring4. Dual clutch assembly
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
Self Diagnosis1.Self-diagnosis process. • When operating the self-diagnostics, the below fault (self-diagnostics code) will blink at 0.5 seconds interval on the temperature display settings (driver's side only) and the remaining symbols are OFF .