| Components |

| 1. Retaining ring 2. Spline hub | 3. Snap ring 4. Dual clutch assembly |
Description• Components location : DCT (Dual Clutch Transmission)• Function The dual clutch is installed within the transmission.
Removal1.Remove the dual clutch transmission from the vehicle.(Refer to Dual Clutch Transmission System - "Dual Clutch Transmission")2.Remove the hybrid motor assembly from the dual clutch transmission assembly.
Description The photo sensor is located at the center of the defrost nozzles.The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is transferred to the automatic temperature control
DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower m