Hyundai Ioniq: Convenient features of your vehicle / Exterior Features

Resetting the Sunroof

The sunroof may need to be reset if the following conditions occur: - The battery is discharged or disconnected or the sunroof fuse has been replaced or disconnected - The sunroof control lever is not operating correctly To reset the sunroof, perform the following steps: 1...

Hood

Opening the hood 1. Park the vehicle and set the parking brake. 2. Pull the release lever to unlatch the hood. The hood should pop open slightly. 3. Go to the front of the vehicle, raise the hood slightly, push up the secondary latch (1) inside of the hood center and lift the hood (2)...

Other information:

Hyundai Ioniq (AE) 2017-2024 Owner's Manual: Instrument Panel Fuse Replacement

1. Turn the vehicle off. 2. Turn all other switches OFF. 3. Open the fuse panel cover. 4. Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location. 5. Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel...

Hyundai Ioniq (AE) 2017-2024 Service Manual: HCU (Hybrid Control Unit). Schematic diagrams

HCU Terminal and Input / Output SignalTerminal FunctionConnector [C133-S] Pin No Description Connected to 1HCU GroundChassis ground2HCU GroundChassis ground3HCU GroundChassis ground4Battery power (B+)Battery5Battery power (B+)Battery6Battery power (B+)Battery7-　8-　9-　10-　11-　12-　13-　14-　15Brake Switch 2 signal inputBrake Switch (NC, IG1)16Brake Switch 1 signal inputBrake Switch (NO, B+)17-　18-　19-　20-　21-　22-　23-　24-　25-　26-　27-　28-　29-　30-　31-32-33-34-　35-　36-　37-　38Start signal inputSmart Key Unit39-　40-　41-　42-　43-　44-　45-　46-　47-　48-　49-　50-　51-　52-　53-　54-　55-　56-　57-　58-　59-　60-　61-　62-　63-　64-　65-　66-　67-　68-　69-　70-　71-　72-　73IGN signal inputSmart Key Unit74-　75-　76-　77-　78Powertrain CAN [High] signal inputOther control modules79Powertrain CAN [Low] signal inputOther control modules80-　81Hybrid CAN [High] signal inputOther control modules82Hybrid CAN [Low] signal inputOther control modules83-　84-　85-　86-　87-　88-　89-　90-　91-　92-　93-　94-　Input/Output signalConnector [C133-S] Pin no Description Condition Type Level 1HCU GroundAlwaysDC VoltageMax...