Hyundai Ioniq: What to do in an emergency / Hazard Warning Flasher

The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle
is stopped near the edge of a roadway.
To turn the hazard warning flasher on or off, press the hazard warning flasher
button both the left and right. The button is located in the center fascia panel.
All turn signal lights will flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
If the Engine Stalls While Driving
Reduce your speed gradually, keeping a straight line. Move cautiously off
the road to a safe place.
Turn on your hazard warning flasher...
Other information:
Special Service Tools
Item
Illustration
Application
Fuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel pump and the fuel feed lineHeated Oxygen Sensor Socket Wrench(09392-1Y100)Removal and installation of the heated oxygen sensor※ SST No...
InspectionFront Seat Heater1.Check for continuity and measure the resistance between terminals No 3 and No 6. Standard value Driver / Assists (cushion + back) : 1.93Ω±10%/23°C2.Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment

read more