Hyundai Ioniq: High Voltage Battery Control System / Main Relay. Specifications
Item
|
Specification
|
Contact
| Rated Voltage (V)
| 450
|
Rated Current (A)
| 80
|
Coil
| Operating Voltage (V)
| 12
|
Resistance (Ω)
| 20.0 - 40.0 [20°C (68°F)]
|
DescriptionThe Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor...
Other information:
Signal WaveformThis example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. The PCM controls the injection and ignition timing by using these signals. Generally CKPS signal is used to detect the piston's position and CMPS signal is used to detect the Top Dead Center of each cylinder...
The Rear Cross-Traffic Collision Warning function monitors approaching cross
traffic from the left and right side of the vehicle when your vehicle is in reverse.
Operating conditions
To operate:
Cluster type A
Go to the 'User Settings → Driver Assistance → Rear Collision Warning and select
Rear Cross- Traffic Collision Warning' on the LCD display...
Categories
Adjust the steering wheel so it points toward your chest, not toward your face.
Make sure you can see the instrument cluster warning lights and gauges. After adjusting,
push the steering wheel both up and down to be certain it is locked in position.
Always adjust the position of the steering wheel before driving.
WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle
control resulting in an accident.
read more