| Components |

| 1. Parking brake pedal 2. Parking brake cable 3. Equalizer assembly | 4. Brake disc 5. Brake caliper |
RemovalParking Brake Pedal1.Disconnect the negative (-) battery cable.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the junction box.
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.