| Component Location |

| 1. Rear seat belt retractor |
Components1. Rear seat belt retractor2. Rear center seat belt retractor 3. Center seat belt 4. Rear seat belt buckle5. Rear seat belt buckle [LH]
Replacement • When installing the belt, make sure not to damage the retractor. 1.Remove the rear pillar trim.
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
High Voltage Shut-off Procedures • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.