| Replacement |
| 1. | Open the glass fully. |
| 2. | Remove the mounting pins (C), from the frame (B), and then remove the deflector (A).
|
| 3. | To install, reverse the removal procedure. |
Replacement • Put on glove to protect your hands.1.Close the sunroof glass completely by pressing the sunroof switch.
Components Location1. Sunroof assembly
Inspection1.Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature.1. Ambient Sensor (+)2. Sensor groundSpecification Ambient temperature [°C (°F)] Resistance between terminal 1 and 2 (
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.