Hyundai Ioniq: Body (Interior and Exterior) / Tailgate Glass

Tailgate Weatherstrip. Repair procedures

Replacement1.Remove the tailgate weatherstrip (A).    • Do not apply sealant to the body.2.To install, reverse the removal procedure...

Components and components location

C..

Other information:

Hyundai Ioniq (AE) 2017-2024 Service Manual: Troubleshooting

Troubleshooting Symptom Possible cause Remedy Hard steeringImproper front wheel alignmentExcessive turning resistance of lower arm ball jointLow tire pressureNo power assistCorrectReplaceAdjustRepair and replacePoor return of steering wheel to centerImproper front wheel alignmentCorrectPoor or rough rideImproper front wheel alignmentMalfunctioning shock absorberBroken or worn stabilizerBroken or worn coil springWorn lower arm bushingCorrectRepair or replaceReplaceReplaceReplace the lower arm assemblyAbnormal tire wearImproper front wheel alignmentImproper tire pressureMalfunctioning shock absorberCorrectAdjust or replaceReplaceWanderingImproper front wheel alignmentPoor turning resistance of lower arm ball jointLoose or worn lower arm bushingCorrectRepairRetighten or replaceVehicle pulls to one sideImproper front wheel alignmentExcessive turning resistance of lower arm ball jointBroken or worn coil springBent lower armCorrectReplaceReplaceRepairSteering wheel shimmyImproper front wheel alignmentPoor turning resistance of lower arm ball jointBroken or worn stabilizerWorn lower arm bushingMalfunctioning shock absorberBroken or worn coil springCorrectReplaceReplaceReplaceReplaceReplaceBottomingBroken or worn coil springMalfunctioning shock absorberReplaceReplaceWheel /tire noise, vibration and harshness concerns are directly related to vehicle speed and are not generally affected by acceleration, coasting or decelerating...

Hyundai Ioniq (AE) 2017-2024 Service Manual: Pre Charge Relay. Repair procedures

Removal1.Shut off the high voltage.(Refer to Hybrid Control System - "High Voltage Shut-off Procedures")2.Remove the rear seat cushion.(Refer to Body - "Rear Seat Assembly")3.Remove the rear door scuff trim.(Refer to Body - "Door Scuff Trim")4.Remove the upper frame (A) after loosening the mounting bolts and nuts...