| General Information |
| 1. | Check & Change intervals
| ||||||||||||||||||||||||||||||||||||
Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Inspection • In principle, the transmission oil is maintenance-free, and no exchange is required. 1.Park the vehicle on flat ground and turn off the engine.
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.