Hyundai Ioniq: Tires and wheels / Wheel Replacement, Tire Traction, Tire Maintenance

Hyundai Ioniq (AE) 2017-2025 Owner's Manual / Maintenance / Tires and wheels / Wheel Replacement, Tire Traction, Tire Maintenance

Wheel Replacement

When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.

Tire Traction

Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when the tread depth is at least 1/16 inch (1.6 mm). To reduce the possibility of losing control, slow down whenever there is rain, snow or ice on the road.

Tire Maintenance

In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment.

When you have new tires installed, make sure they are balanced. This will increase vehicle ride comfort and tire life. Additionally, a tire should always be rebalanced if it is removed from the wheel.

Tire Replacement

If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire...

Tire Sidewall Labeling

This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification...

Other information:

Hyundai Ioniq (AE) 2017-2025 Owner's Manual: Lighting control

To operate the lights, turn the knob at the end of the control lever to one of the following positions: 1. DRL (Daytime Running Lights) OFF position 2. AUTO light position 3. Parking lamp position 4. Headlamp position Daytime running light (DRL) (if equipped) The Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day, especially after dawn and before sunset...

Hyundai Ioniq (AE) 2017-2025 Service Manual: Cruise Control Switch. Repair procedures

Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel assembly.(Refer to Steering System - "Steering Wheel")3.Remove the steering back cover (A).4.Remove the steering remote control connector (A).5.Remove the steering remote control after loosening the screws...