Hyundai Ioniq (AE): Engine Mechanical System / Engine and Transaxle Assembly
- Engine Room Under Cover. Repair procedures
- Engine Mounting. Components and components location
- Engine Mounting. Repair procedures
- Engine and Transaxle Assembly. Repair procedures
Special Service Tools Tool (Number and name) Illustration Use Crankshaft damper pulley adapter(09231-2M100)Crankshaft damper pulley adapter holder(09231-2J210)Removal and installation of crankshaft damper pully bolt.
Removal and installation1.Remove the engine room under cover (A). Tightening torque : 3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)2.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: In-car Sensor. Description and operation
DescriptionThe In-car air temperature sensor is built in the heater & A/C control unit.The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the contr
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Description and operation
- Troubleshooting
- Suspension System
- New on site
- Most important about car
