Hyundai Ioniq (AE): LCD Display Messages / Low Pressure, Turn on FUSE SWITCH/ Turn FUSE SWITCH On

Low Pressure

Hyundai Ioniq. Low Pressure, Turn on FUSE SWITCH/ Turn FUSE SWITCH On

This message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated.

Turn on FUSE SWITCH/ Turn FUSE SWITCH On

Hyundai Ioniq. Low Pressure, Turn on FUSE SWITCH/ Turn FUSE SWITCH On

Either message is displayed if the fuse switch located on the fuse box under the steering wheel is OFF.

You should turn the fuse switch on.

    This warning light is to warn the driver the road may be icy. When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blinks and then illuminates.

    Low Washer Fluid (if equipped) This message is displayed if the washer fluid level in the reservoir is nearly empty. Have the washer fluid reservoir refilled.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation

    DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures

    Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0127