Shift to P
This message is displayed if you try to turn off the vehicle with the shift lever in the N (Neutral) position.
At this time, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more, it will turn to the ON position).
Low Key Battery
This message is displayed if the battery of the smart key is discharged while changing the Engine Start/ Stop button to the OFF position.
Press START button while turning wheel
This message is displayed if the steering wheel does not unlock normally when the Engine Start/Stop button is pressed.
You should press the Engine Start/ Stop button while turning the steering wheel right and left.
Check Steering Wheel Lock System
This message is displayed if the steering wheel does not lock normally while the Engine Start/Stop button changes to the OFF position.
Press brake pedal to start vehicle
This message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal.
You can start the vehicle by depressing the brake pedal.
Key not in vehicle
This message is displayed if the smart key is not in the vehicle when you press the Engine Start/Stop button.
When attempting to start the vehicle, always have the smart key with you.
Key not detected
This message is displayed if the smart key is not detected when you press the Engine Start/Stop button.
Press START button again
This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed.
If this occurs, attempt to start the engine by pressing the Engine Start/ Stop button again.
If the warning message appears each time you press the Engine Start/Stop button, have your vehicle inspected by an authorized HYUNDAI dealer.
Press START button with key
This message is displayed if you press the Engine Start/Stop button while the warning message "Key not detected" is displayed. At this time, the immobilizer indicator light blinks.
Check BRAKE SWITCH fuse
This message is displayed if the brake switch fuse is disconnected.
You need to replace the fuse with a new one before starting the engine.
If that is not possible, you can start the engine by pressing the Engine Start/Stop button for 10 seconds in the ACC position.
Shift to P to start vehicle
This message is displayed if you try to start the engine with the shift lever not in the P (Park) position.
Cruise Indicator Light This indicator light illuminates: • When the cruise control system is enabled. Cruise SET Indicator Light This indicator light illuminates: • When the cruise control speed is set.
Door, Hood, Liftgate Open This warning is displayed indicating which door, or hood, or liftgate is open. CAUTION Before driving the vehicle, you should confirm that the door/ hood/liftgate is fully closed.
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
General Safety Information and CautionBe careful of the following precautions when driving the vehicle using the smart cruise control system. • The smart cruise control system may have limits in detecting distance to the vehicle ahead due to road and traffic conditions.