Hyundai Ioniq (AE): Hybrid Motor Control System / Motor Temperature Sensor. Description and operation
| Description |
| • | Motor temperature affects the motor power significantly. |
| • | If the motor overheats, its main components, including permanent magnet, stator coil, etc., may be damaged, negatively affecting the operation of the drive motor. To prevent this, a temperature sensor is installed to determine the overheat of the motor and control the motor torque. |
Inspection1.Check the resolver sensor resistance. [Hybrid drive motor] Measuring equipment: Multimeter Category Inspection area Inspection criteria Remarks Resistance(Resolversensor)Pin 1 - 511.
Circuit DiagramTemperature sensor (hybrid drive motor)Resolver sensor (HSG)
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Core. Repair procedures
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Loosen the mounting screws and remove the driver's temperature control actuator (A).4.Remove the heater core cover (A) after loosening the mounting screws.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Description and operation
System OverviewParking Distance Warning (PDW) is an electronic driving aid that warns the driver to be cautious while parking or driving at low speed. The sensor uses ultrasonic waves to detect objects within proximity of the vehicle.PDW consists of four RPS sensors which are detecting the obstacles and transmit the result separated into three war
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- General Information
- Repair procedures
- New on site
- Most important about car
