Removal • When working on the high voltage system, make sure that you are familiar and comply with the "Safety Precautions, Cautions and Warnings".
DescriptionIn a hybrid electric vehicle, HCU (an upper level controller), LDC (power converter), and inverter are integrated in the HPCU. HPCU is located on the left side of the engine compartment.
Inspection1.Turn the ignition switch ON.2.Connect the GDS.3.Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.4.The voltage will rise with higher intensive light and reduce with lower intensive light.1. Auto light signal2.
Service Point Target Auto Calibration (SPTAC)When you need calibration :– Front view camera is removed and mounted– Replace front view camera with a new one – Windshield glass changed– Front view camera coupler of the windshield glass is deformedService Point T