Hyundai Ioniq (AE): Normal Charge / Unlock Charging Connector in Emergency
If the charging connector does not disconnect due to battery discharge and failure of the electric wires, open the hood and slightly pull the emergency cable. The charging connector will then disconnect.
â– Normal Charger 1. When charging is complete, remove the charging plug from the electrical outlet of the normal charging station. 2. Hold the charging connector handle and pull it while pressing the release button (1).
â– Portable Charger (1) Code and Plug (Code set) (2) Control Box (3) Charging Cable and Charging Connector Trickle Charge can be used when Normal Charge is not available by using household electricity.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Unit. Components and components location
Component Location1. Heater unit assemblyCompoents1. Heater core cover2. Heater core & Seal assembly3. Mode actuator [LH]4. Temperature control actuator [LH]5. Shower duct [LH]6. Duct sensor [Floor]7. PTC Heater8. Duct sensor [Vent]9. Heater & Evaporator lower case10.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Maintenance
- Suspension System
- Jump Starting
- New on site
- Most important about car
