Hyundai Ioniq: LCD Display Messages / Check Hybrid system. Do not start engine, Stop vehicle and check power supply

Hyundai Ioniq (AE) 2017-2025 Owner's Manual / Convenient features of your vehicle / Instrument Cluster / LCD Display Messages / Check Hybrid system. Do not start engine, Stop vehicle and check power supply

Check Hybrid system. Do not start engine

Hyundai Ioniq. Check Hybrid system. Do not start engine, Stop vehicle and check power supply

This message is displayed when the hybrid battery power (SOC) level is low. A warning chime will sound until the problem is solved.

In this case have your vehicle inspected by an authorized HYUNDAI dealer.

Stop vehicle and check power supply

Hyundai Ioniq. Check Hybrid system. Do not start engine, Stop vehicle and check power supply

This message is displayed when a failure occurs in the power supply system.

In this case, park the vehicle in a safe location and tow your vehicle to the nearest authorized HYUNDAI dealer and have the vehicle inspected.

Check Hybrid system, Check Hybrid system. Turn engine Off

Check Hybrid system This message is displayed when there is a problem with the hybrid control system. Refrain from driving when the warning message is displayed...

Stop vehicle to charge battery/ Park with engine On to charge battery, Refuel to prevent Hybrid battery damage

Stop vehicle to charge battery/ Park with engine On to charge battery Either message is displayed when the hybrid battery power (SOC) level is low. In this case, park the vehicle in a safe location and wait until the hybrid battery is charged...

Other information:

Hyundai Ioniq (AE) 2017-2025 Owner's Manual: Steps for determining correct load limit

1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs...

Hyundai Ioniq (AE) 2017-2025 Service Manual: Reservoir. Repair procedures

InspectionInverter Reservoir Cap Test1.Remove the reservoir cap and mount it on the pressure tester.2.Apply pressure of 93.16 - 122.58 kPa (0.95 - 1.25 kgf/cm², 13.51 - 17.78 psi).3.Check if the pressure decreases.4.If the pressure decreases, replace the cap...