Hyundai Ioniq: Instrument Cluster / LCD Display Messages

Hyundai Ioniq (AE) 2017-2024 Owner's Manual / Convenient features of your vehicle / Instrument Cluster / LCD Display Messages

Shift to P

This message is displayed if you try to turn off the vehicle with the shift lever in the N (Neutral) position.

At this time, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more, it will turn to the ON position).

Low Key Battery

This message is displayed if the battery of the smart key is discharged while changing the Engine Start/ Stop button to the OFF position.

Press START button while turning wheel

This message is displayed if the steering wheel does not unlock normally when the Engine Start/Stop button is pressed.

You should press the Engine Start/ Stop button while turning the steering wheel right and left.

Check Steering Wheel Lock System

This message is displayed if the steering wheel does not lock normally while the Engine Start/Stop button changes to the OFF position.

Press brake pedal to start vehicle

This message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal.

You can start the vehicle by depressing the brake pedal.

Key not in vehicle

This message is displayed if the smart key is not in the vehicle when you press the Engine Start/Stop button.

When attempting to start the vehicle, always have the smart key with you.

Key not detected

This message is displayed if the smart key is not detected when you press the Engine Start/Stop button.

Press START button again

This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed.

If this occurs, attempt to start the engine by pressing the Engine Start/ Stop button again.

If the warning message appears each time you press the Engine Start/Stop button, have your vehicle inspected by an authorized HYUNDAI dealer.

Press START button with key

This message is displayed if you press the Engine Start/Stop button while the warning message "Key not detected" is displayed. At this time, the immobilizer indicator light blinks.

Check BRAKE SWITCH fuse

This message is displayed if the brake switch fuse is disconnected.

You need to replace the fuse with a new one before starting the engine.

If that is not possible, you can start the engine by pressing the Engine Start/Stop button for 10 seconds in the ACC position.

Shift to P to start vehicle

This message is displayed if you try to start the engine with the shift lever not in the P (Park) position.

Other Indicator Lights

Cruise Indicator Light This indicator light illuminates: • When the cruise control system is enabled. Cruise SET Indicator Light This indicator light illuminates: • When the cruise control speed is set...

Door, Hood, Liftgate, Sunroof Open

Door, Hood, Liftgate Open This warning is displayed indicating which door, or hood, or liftgate is open. CAUTION Before driving the vehicle, you should confirm that the door/ hood/liftgate is fully closed...

Other information:

Hyundai Ioniq (AE) 2017-2024 Service Manual: Repair procedures


Removal    • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries...

Hyundai Ioniq (AE) 2017-2024 Owner's Manual: Smart Cruise Control System


➀ Cruise indicator ➁ Set speed ➂ Vehicle-to-vehicle distance To see the SCC screen on the LCD display in the cluster, select SCC/ LKA mode () for cluster type A or ASSIST mode () for cluster type B. For more information, refer to "LCD Display Modes" in chapter 3...

Categories

Side view mirror control

Hyundai Ioniq. Side view mirror control

Adjusting the side mirrors:

1. Press either the L (driver's side) or R (passenger's side) button (1) to select the side view mirror you would like to adjust.

read more


 
Copyright © 2024 www.hioniqae.com