Hyundai Ioniq: LCD Display Messages / Parking Distance Warning system (Reverse) malfunction, Check Active Air Flap System

Hyundai Ioniq (AE) 2017-2025 Owner's Manual / Convenient features of your vehicle / Instrument Cluster / LCD Display Messages / Parking Distance Warning system (Reverse) malfunction, Check Active Air Flap System

Parking Distance Warning system (Reverse) malfunction

Hyundai Ioniq. System

This warning is displayed if there is a problem with the Parking Assist System. Have the vehicle inspected by an authorized dealer of HYUNDAI.

Check Active Air Flap System

Hyundai Ioniq. System

This message is displayed in the following situations:

- There is a malfunction with the actuator flap
- There is a malfunction with the actuator air flap controller
- The air flap does not open

When all of the above conditions are fixed, the warning will disappear.

Check Lane Keeping Assist (LKA) system, Check Driver Attention Warning (DAW) system,

Check Lane Keeping Assist (LKA) system (if equipped) Either message is displayed if there is a problem with the Lane Keeping Assist (LKA) System. Have the vehicle inspected by an authorized HYUNDAI dealer...

Check Hybrid system, Check Hybrid system. Turn engine Off

Check Hybrid system This message is displayed when there is a problem with the hybrid control system. Refrain from driving when the warning message is displayed...

Other information:

Hyundai Ioniq (AE) 2017-2025 Owner's Manual: Resetting the Sunroof

The sunroof may need to be reset if the following conditions occur: - The battery is discharged or disconnected or the sunroof fuse has been replaced or disconnected - The sunroof control lever is not operating correctly To reset the sunroof, perform the following steps: 1...

Hyundai Ioniq (AE) 2017-2025 Owner's Manual: Wipers and Washers

A : Wiper speed control · MIST – Single wipe · OFF – Off · INT – Intermittent wipe · LO – Low wiper speed · HI – High wiper speed B : Intermittent control wipe time adjustment C :Wash with brief wipes Windshield Wipers Operates as follows when the Engine Start/Stop button is in the ON position...