Hyundai Ioniq: LCD Display Messages / Maintaining Hybrid mode to continue heating or air conditioning (Plug-in hybrid
vehicle)

This message is displayed when the vehicle maintains the HEV mode to allow heating
or air conditioning. The mode does not change when the driver presses the [EV/HEV]
button to switch from the HEV mode to EV mode while the heating and cooling system
is on and the coolant temperature is below 7 °F (-14 °C).
Aux. Battery Saver+ was used while parked (Plug-in hybrid vehicle)
This message is displayed when the Aux. Battery Saver+ function has been completed
when the vehicle is turned ON...
Low/High System Temp. Maintaining Hybrid mode (Plug-in hybrid vehicle)
This message is displayed when the temperature of the high-voltage (hybrid) battery
is too low or too high...
Other information:
1. Turn the vehicle off.
2. Turn all other switches OFF.
3. Open the fuse panel cover.
4. Refer to the label on the inside of the fuse panel cover to locate the suspected
fuse location.
5. Pull the suspected fuse straight out. Use the removal tool provided in the
engine compartment fuse panel...
To activate/deactivate the LKA system:
With the Engine Start/Stop button in the ON position, press the LKA system button
located on the instrument panel on the left hand side of the steering wheel. The
indicator in the cluster display will initially illuminate white...
Categories
Adjust the steering wheel so it points toward your chest, not toward your face.
Make sure you can see the instrument cluster warning lights and gauges. After adjusting,
push the steering wheel both up and down to be certain it is locked in position.
Always adjust the position of the steering wheel before driving.
WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle
control resulting in an accident.

read more