| Components |

| 1. Air duct 2. Flap | 3. Housing 4. Actuator assembly |
Specifications Items Specifications Operating temperature -31 - 185°F (-35 - 85°C) Operating voltage DC 9 - 16V Rated voltage DC 12V Rated current (No load) 300mA or less [LH][RH]
Schematic DiagramCircuit Diagram
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Replacement1.Disconnect the air damper (A) from the glove box (B).2.Remove the stopper (B) from the glove box (A).3.Remove the filter cover (A) by pressing the knob.4.Replace the air filter (A) with a new one according to the direction of air filter. • To remove the filter easily, press the right side inwa