| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
The gear actuator is comprised of the shift motor and select solenoid. Gear actuator shift motor and select solenoid receive signals from TCM to control the gear. |
Specification Item Condition Specification Resistance (line to line)Shift motor 1/2126.
Circuit Diagram
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.