Hyundai Ioniq: Fuel Delivery System / Fuel Pump Motor. Repair procedures

Hyundai Ioniq (AE) 2017-2024 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pump Motor. Repair procedures

Removal

1.	Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump")

2.	Disconnect the fuel pump motor connector (A) and fuel sender connector (B).

3.	Press the fixing hook (A) with a driver and then remove fuel sender (B) in the arrow direction.

4.	Disconnect the fuel feed tube (B) after removing the fixing pin (A).

5.	Remove the head assembly (B) after releasing the fixing hooks (A).

6.	Remove the reservoir-cup (B) after releasing the fixing hooks (A).

7.	Disconnect the ground line (A).

8.	Disconnect the fuel pump motor connector (A).

9.	Disconnect the fuel pressure regulator (B) after removing the fixing pin (A).

10.	Remove the free filter p (B) after releasing the fixing hooks (A).

11.	Remove the fuel pump motor (A) from the fuel filter.

Installtion

1.	Install in the reverse order of removal.

Fuel Filter. Repair procedures

Removal1.Remove the fuel pump.(Refer to Fuel Delivery System - "Fuel Pump") 2.Disconnect the fuel pump motor connector (A) and fuel sender connector (B)...

Fuel Sender. Repair procedures

Removal1.Remove the fuel pump.(Refer to Fuel Delivery System - "Fuel Pump") 2.Disconnect the fuel pump motor connector (A) and fuel sender connector (B)...

Other information:

Hyundai Ioniq (AE) 2017-2024 Owner's Manual: Climate Control Air Filter

Filter Inspection The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier...

Hyundai Ioniq (AE) 2017-2024 Service Manual: Front Oil Seal. Repair procedures

Removal and Installation1.Remove the crankshaft damper pulley.(Refer to Timing System - "Crankshaft Damper Pulley")2.Remove the front oil seal (A).3.Apply engine oil to a new oil seal lip & outer surface. • Remove any debris from the lip portion of the oil seal...