| Removal |
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the license lamp (A) after disengaging the license lamp mounting clip (B).
|
| 3. | Replace the bulb (A) after removing a lens.
|
| Installation |
| 1. | Install the license lamp assembly. |
| 2. | Connect the negative (-) battery terminal. |
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front bumper.(Refer to Body - "Front Bumper Cover")3.Disconnect the DRL connector.4.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear spoiler assembly.(Refer to Body - "Tail Gate Trim")3.Disconnect the high mounted stop lamp connector.
Removal1.Remove the front bumper.(Refer to Body - "Front Bumper")2.Disconnect the smart cruise control unit connector (A).3.Remove the smart cruise control nuit assembly (B) from thevehicle after loosening mounting bolts.Installation1.Install in the reverse order of removal.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.