Hyundai Ioniq: Hybrid Control System / Low Voltage DC/DC Converter (LDC)
Removal
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system...
DescriptionThe Low Voltage DC/DC is integrated into the HPCU. It charges the auxiliary battery as a substitute for generator by converting the high voltage (DC 270V) from the high voltage battery into low voltage (DC 12V)...
Other information:
Removal1.Disconnect the negative (-) battery terminal.2.Remove the license lamp (A) after disengaging the license lamp mounting clip (B).3.Replace the bulb (A) after removing a lens.Installation1.Install the license lamp assembly.2.Connect the negative (-) battery terminal...
Inspection 1.Disconnect the negative (-) battery terminal.2.Remove the roof trim.(Refer to Body - "Roof Trim")3.Disconnect the sunroof motor (A) connector.4.Ground the terminals as below table, and check that the sunroof unit operates.
•
When inspecting the sunroof motor operation, sunroof motor and roller blind motor always should be connected...
Categories
Adjust the steering wheel so it points toward your chest, not toward your face.
Make sure you can see the instrument cluster warning lights and gauges. After adjusting,
push the steering wheel both up and down to be certain it is locked in position.
Always adjust the position of the steering wheel before driving.
WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle
control resulting in an accident.
read more