Hyundai Ioniq: Cylinder Block / Piston and Connecting Rod. Components and components location

1. Piston ring 2. Piston 3. Piston pin 4. Connecting rod
| 5. Connecting rod upper bearing 6. Connecting rod lower bearing 7. Connecting rod bearing cap
|
Removal
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system...
Disassembly
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system...
Other information:
InspectionThrottle Position Sensor (TPS)1.Connect the GDS on the Data Link Connector (DLC).2.Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification : Refer to "Specification"ETC Motor1.Turn the ignition switch OFF...
The Forward Collision-Avoidance Assist (FCA) system is designed to help monitor
the vehicle ahead or a pedestrian in the roadway through radar signals and camera
recognition to warn the driver that a collision is imminent, and if necessary, apply
emergency braking...
Categories
Adjust the steering wheel so it points toward your chest, not toward your face.
Make sure you can see the instrument cluster warning lights and gauges. After adjusting,
push the steering wheel both up and down to be certain it is locked in position.
Always adjust the position of the steering wheel before driving.
WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle
control resulting in an accident.

read more