| Component Location |

| 1. Rear center seat belt retractor |
Replacement • When installing the belt, make sure not to damage the retractor. 1.Remove the rear pillar trim.
Replacement • When installing the belt, make sure not to damage the retractor.1.Remove the rear seat back cover.
DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.