Hyundai Ioniq (AE): Gear Actuator Assembly / Specifications
| Specification |
|
Item
|
Condition
|
Specification
|
| Resistance (line to line) | Shift motor 1/2 | 126.4 mΩ ± 10 % |
| Select solenoid 1/2 | 0.7 mΩ ± 10 % | |
| Max. current | Shift motor 1/2 | 45 A |
| Select solenoid 1/2 | 20 A | |
| Select solenoid sensor output | Push | 4.0 ± 0.15 V |
| Pull | 1.0 ± 0.15 V | |
| Operation condition (°C)°F | -40 to 257 °F (- 40 to 125 °C ) | |
| Rated voltage | 13 V | |
| Sensor supply voltage | 8.75 V | |
Components1. Gear actuator assembly2. Shift motor (Even)3. Shift motor (Odd)4. Select solenoid (Even)5. Select solenoid (Odd)
Description• Components location : DCT (Dual Clutch Transmission)• Function The gear actuator is comprised of the shift motor and select solenoid.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: PTC Heater. Repair procedures
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Warning Indicator. Repair procedures
RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- DCT(Dual Clutch Transmission) System
- Engine Clutch System
- General Information
- New on site
- Most important about car
