Hyundai Ioniq (AE): DCT(Dual Clutch Transmission) System / Dual Clutch Transmission Control System
- Description and operation
- Components and components location
- DCT Control Module (TCM). Description and operation
- DCT Control Module (TCM). Schematic diagrams
- DCT Control Module (TCM). Repair procedures
- Clutch Actuator Assembly
- Gear Actuator Assembly
- Input shaft speed sensor 1
- Input shaft speed sensor 2
- Inhibitor Switch
- Shift Lever. Components and components location
- Shift Lever. Repair procedures
- Shift Cable. Components and components location
- Shift Cable. Repair procedures
Inspection • In principle, the transmission oil is maintenance-free, and no exchange is required. 1.Park the vehicle on flat ground and turn off the engine.
DescriptionThe Dual Clutch Transmission (DCT) control system measures required data to identify the state of the control target and computes the appropriate compensation value if adjustment is necessary.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation
DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Front View Camera Unit. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front view camera cover (A).3.Disconnect the front view camera connector (A).4.Remove the front view camera after disengaging the mounting bracket (A).Installation1.Align front view camera with windshield bracket using forward edge point (A).
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Repair procedures
- Heating, Ventilation and Air Conditioning
- DCT(Dual Clutch Transmission) System
- New on site
- Most important about car
